| FDP8442
40V N-Channel PowerTrench MOSFET |
|||
|
Qualification Data
|  |
| Attribute | Value | UOM |
|---|---|---|
| General Information | ||
| Device Marking(TOP MARK) | $Y&Z&3&K
FDP 8442 | |
| Family Code | 021 | |
| Package Type | TO-220 | |
| Package Description | 003, PLASTIC MOLDED TO220-3 LEAD PKG, THRU-HOLE | |
| Pin Count | 3 | |
| FIT | 6.5 | |
| Maximum Reflow Temperature | NA (thru hole) | |
| MSL Rating | NA (thru hole)| | |
| Restriction of Hazardous Substance | ||
| Standard Plating Finish | Matte Sn | |
| Base Metal/Leadframe Material | Copper,Iron,Phosphorus,Silver | |
| Die Fabrication | ||
| Fabrication Process Identifier | 33473LLJ | |
| Package Assembly* | ||
| Plating Finish Layer Thickness | 8.0um - 13um | |
| Thermal Impedance (Theta JA) | 62 | °C/Watt |
| Thermal Impedance (Theta JC) | 1 | °C/Watt |
| Moisture Sensitivity | NA | |
| UL Flammability Rating | UL94-V0 | |
| UL Flammability Rating | PDD | |
| DAP Size | 246*190MILS | |
| Frame Material | L-BEND | |
| DAP Size | REDESIGN | |
| Frame Material | 12SNOFC | |
| Wire Material | AL | |
| Wire Diameter | 20.0 MIL | |
| Wire Material | AL | |
| Wire Diameter | 5.0 MIL | |
| Die Attach Type | Solder /92.5Pb | |
*If an attribute is listed twice, either can be used on the part.