FAN6300H − Highly Integrated Quasi-Resonant Current Mode PWM Controller

The highly integrated FAN6300A/H of PWM controller provides several features to enhance the performance of flyback converters. FAN6300A is applied on quasiresonant flyback converters where maximum operating frequency is below 100kHz. FAN6300H is suitable for high-frequency operation (up to 190kHz). A built-in HV startup circuit can provide more startup current to reduce the startup time of the controller. Once the VDD voltage exceeds the turn-on threshold voltage, the HV startup function is disabled immediately to reduce power consumption. An internal valley voltage detector ensures power system operates at quasi-resonant operation over a wide-range of line voltage and any load conditions, as well as reducing switching loss to minimize switching voltage on drain of power MOSFET.

To minimize standby power consumption and light-load efficiency, a proprietary green-mode function provides off-time modulation to decrease switching frequency and perform extended valley voltage switching to keep to a minimum switching voltage. The operating frequency is limited by minimum tOFF time, which is 38µs to 8µs in FAN6300A and 13µs to 3µs in FAN6300H, so FAN6300H can operate at higher switching frequency than FAN6300A.

FAN6300A/H controller also provides many protection functions. Pulse-by-pulse current limiting ensures the fixed-peak current limit level, even when a short circuit occurs. Once an open-circuit failure occurs in the feedback loop, the internal protection circuit disables PWM output immediately. As long as VDD drops below the turn-off threshold voltage, the controller also disables PWM output. The gate output is clamped at 18V to protect the power MOS from high gate-source voltage conditions. The minimum tOFF time limit prevents the system frequency from being too high. If the DET pin triggers OVP, internal OTP is triggered and the power system enters latch-mode until AC power is removed. The FAN6300A/H controller is available in an 8-pin Small Outline Package (SOP).

Buy Products Request Free Samples

Product Status/Pricing/Packaging

Product Product & Eco Status *Pricing Packaging & Packing Info **Package Marking Convention Qualification Support Compliance Certificates
0 FAN6300HNY Last time buys being accepted until 14-Sep-2013
Green as of Dec 2009
$0.62 MDIP 8L Details RAIL Line 1:$Y (Fairchild logo)
&Z (Plant Code)
&2 (2-Digit Date Code) &K
Line 2:6300H
Line 3:NYD
FIT :  1  
ESD (HBM) :  3000  V
Moisture Sensitivity Level (MSL) :  NA  
Show more...
0 FAN6300HMY Full Production
Green as of Jul 2009
$0.78 SO 8L NB Details TAPE REEL Line 1:$Y (Fairchild logo)
&Z (Plant Code)
&2 (2-Digit Date Code) &K
Line 2:6300H
Line 3:MYD
FIT :  1  
ESD (HBM) :  3000  V
Moisture Sensitivity Level (MSL) :  1  
Show more...

Features

  • High-Voltage Startup
  • Quasi-Resonant Operation
  • Cycle-by-Cycle Current Limiting
  • Peak-Current-Mode Control
  • Leading-Edge Blanking (LEB)
  • Internal Minimum tOFF
  • Internal 5ms Soft-Start
  • Over Power Compensation
  • GATE Output Maximum Voltage
  • Auto-Recovery Over-Current Protection (FB Pin)
  • Auto-Recovery Open-Loop Protection (FB Pin)
  • VDD Pin and Output Voltage (DET Pin) OVP Latched
  • Low Frequency Operation (below 100kHz) for FAN6300A
  • High Frequency Operation (up to 190kHz) for FAN6300H

Applications

  • Notebook PC
  • External AC-DC Merchant Power Supply - Wireless Communications
  • DVD
  • STB

Application Notes

Application Note Description
AN-6300 FAN6300/A/H Highly Integrated Quasi-Resonant PWM Controller(572 K) 03-Mar-2011

Reference Designs

Application Document Number Featured Products Output
Power
Input
Voltage
Topology
LED Lighting RD-400 FAN3111C, FAN6300H, FAN7346, FAN7382, FL7930C, FSL138MRT 100W 80~310V AC


© Copyright Fairchild Semiconductor. All rights reserved. Privacy Policy | Site Terms & Conditions | Standard Terms & Conditions of Sale | Trademarks | Site Map | IPC Saving our world 1mW at a time
  Knowledge Base Support Request Form.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
         
       
 
 
 
 
 
 
 
 
 
 
 
  Slide to enable Submit button:
 
 
Locked Unlocked