FL7930B − Single-Stage Flyback and Boundary Mode PFC Controller for Lighting

The FL7930 is an active Power Factor Correction (PFC) controller for low-to high-power lumens applications that operate in Critical Conduction Mode (CRM). It uses a voltage-mode PWM that compares an internal ramp signal with the error amplifier output to generate a MOSFET turn-off signal. Because the voltage-mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of an input voltage sensing network necessary for a current-mode CRM PFC controller.

FL7930 provides over-voltage, open-feedback, over-current, input-voltage-absent detection, and under-voltage lockout protections. The FL7930 can be disabled if the INV pin voltage is lower than 0.45V and the operating current decreases to a very low level. Using a new variable on-time control method, THD is lower than the conventional CRM boost PFC ICs.

The FL7930B provides an additional OVP pin that can be used to shut down the boost power stage when output voltage exceeds OVP level due to damaged resistors connected at the INV pin. The FL7930C provides a PFC-ready pin can be used to trigger other power stages when PFC output voltage reaches the proper level (with hysteresis).

Buy Products Request Free Samples

Product Status/Pricing/Packaging

Product Product & Eco Status *Pricing Packaging & Packing Info **Package Marking Convention Qualification Support Compliance Certificates
0 FL7930BMX Full Production
ROHS Compliant
$0.506 SO 8L NB Details TAPE REEL Line 1:$Y (Fairchild logo)
&Z (Plant Code)
&2 (2-Digit Date Code) &K
Line 2:FL
Line 3:7930B
FIT :  6.5  
ESD (CDM) :  2000  V
ESD (HBM) :  2500  V
Show more...
Show discontinued variants ...

Features

  • Additional PFC-Ready Function (FL7930C Only)
  • Input-Voltage-Absent-Detection Circuit
  • Maximum Switching Frequency Limitation
  • Internal Soft-Start with Overshoot Prevention
  • Internal Total Harmonic Distortion (THD) Optimizer
  • Precise Adjustable Output Over-Voltage Protection
  • Additional OVP Detection Pin (FL7930B Only)
  • Open-Feedback Protection and Disable Function
  • Zero-Current Detector
  • 150µs Internal Startup Timer
  • MOSFET Over-Current Protection (OCP)
  • Under-Voltage Lockout with 3.5V Hysteresis
  • Low Startup and Operating Current
  • Totem-Pole Output with High State Clamp
  • +500/-800mA Peak Gate Drive Current
  • 8-Pin Small Outline Package (SOP)

Applications

  • Lighting

Application Notes

Application Note Description
AN-FEBFLS2100XS4CH_L12U160A User Guide for FEBFLS2100XS4CH_L12U160A(4,874 K) 05-Feb-2013
AN-9738 Design Guideline on 150W Power Supply for LED Street Lighting Design Using FL7930B and FAN7621S(1,209 K) 20-Apr-2011
AN-9732 LED Application Design Guide Using BCM Power Factor Correction (PFC) Controller for 200W Lighting System(2,749 K) 07-Apr-2011
AN-9731 LED Application Design Guide Using BCM Power Factor Correction (PFC) Controller for 100W Lighting System(1,424 K) 07-Apr-2011
AN-FEBFLS2100XS1CH-L12U160A User Guide for FEBFLS2100XS1CH_L12U160A(4,840 K) 12-Nov-2012
AN-FEBFLS1800XS4CH-L11U100A User Guide for FEBFLS1800XS4CH_L11U100A(4,566 K) 06-Mar-2013
AN-FEBFLS1800XS1CH-L11U100A User Guide for FEBFLS1800XS1CH_L11U100A(4,278 K) 12-Nov-2012

Technical Articles

Videos

LED Lighting Total Solutions

>150W LED Lighting Solution with PFC and Load Control

View all videos

Reference Designs

Application Document Number Featured Products Output
Power
Input
Voltage
Topology
LED Lighting RD-L012 FAN7346, FL7930B, FLS2100XS 160W 90-265VAC CRM PFC + LLC H/B + 4 Channel CC
LED Lighting RD-L011 FAN7346, FL7930B, FLS1800XS 100W 90-265VAC CRM PFC + LLC H/B + 4 Channel CC
LED Lighting RD-L013 FAN7621S, FAN7930B, FCPF11N60NT, FDPF7N60NZ, FL7930B 150W 85-277VAC CRM PFC + LLC H/B


© Copyright Fairchild Semiconductor. All rights reserved. Privacy Policy | Site Terms & Conditions | Standard Terms & Conditions of Sale | Trademarks | Site Map | IPC Saving our world 1mW at a time
  Knowledge Base Support Request Form.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
         
       
 
 
 
 
 
 
 
 
 
 
 
  Slide to enable Submit button:
 
 
Locked Unlocked