The FOD2200 is an optically coupled logic gate that combine an AlGaAs LED and an integrated high gain photo detector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter.

The Electrical and Switching Characteristics of the FOD2200 are guaranteed over the temperature range of 0°C to 85°C and a V_CC range of 4.5 volts to 20 volts. Low I_F and wide V_CC range allow compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed optocouplers. Logic signals are transmitted with a maximum propagation delay of 300 nsec. The FOD2200 is useful for isolating high speed logic interfaces, buffering of input and output lines, and implementing isolated line receivers in high noise environments.

• 1 kV/µs Minimum Common Mode Rejection
• Compatible with LSTTL, TTL, and CMOS Logic
• Wide V_CC Range (4.5 to 20 V)
• 2.5 Mbd Guaranteed over Temperature
• Low Input Current (1.6 mA)
• Three State Output (No Pullup Resistor Required)
• Guaranteed Performance from 0°C to 85°C
• Hysteresis
• Safety Approvals Pending - UL, CSA, VDE
• V_ISO = 5kVRMS

• Isolation of High Speed Logic Systems
• Computer-Peripheral Interfaces
• Microprocessor System Interfaces
• Ground Loop Elimination
• Pulse Transformer Replacement
• Isolated Buss Driver
• High Speed Line Receiver