FPF1048 − IntelliMAX™ 3A-Capable, Slew-Rate-Controlled Load Switch with True Reverse Current Blocking
The FPF1048B advanced load management switch targets applications requiring a highly integrated solution. It disconnects loads powered from the DC power rail (<6V) with stringent off-state current targets and high load capacitances (up to 100µF). The FPF1048B consists of slew-rate controlled low-impedance MOSFET switch (23mΩ typical) and integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on power rails.
The FPF1048B has a True Reverse Current Blocking (TRCB) function that obstructs unwanted reverse current from VOUT to VIN during both ON and OFF states. The exceptionally low off-state current drain (<1µA maximum) facilitates compliance with standby power requirements. The input voltage range operates from 1.5V to 5.5VDC to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low-voltage control signal / General-Purpose Input / Output (GPIO) without an external pull-down resistor.
The device is packaged in advanced, fully “green” compliant, 1.0mm x 1.5mm, Wafer-Level Chip-Scale Package (WLCSP) with backside lamination.
￭ Input Voltage Operating Range: 1.5V to 5.5V
￭ Typical RDS(ON)
- 21mΩ at VIN
- 23mΩ at VIN
- 41mΩ at VIN
- 90mΩ at VIN
￭ Slew Rate/Inrush Control with tR: 2.7ms (Typ.)
￭ 3A Maximum Continuous Current Capability
￭ Low Off Switch Current:
￭ True Reverse Current Blocking (TRCB)
￭ Logic CMOS IO Meets JESD76 Standard for GPIO Interface and Related Power Supply Requirements
￭ ESD Protected:
- Human Body Model:
- Charged Device Model:
- IEC 61000-4-2 Air Discharge:
- IEC 61000-4-2 Contact Discharge:
- Wireless LAN Card & Broadband Access