FPF2146

Datasheet Buy Sample

Full Function Load Switch with Reverse Current Blocking

General Description

The FPF2140/42/43/44/46/47 is a series of load switches which provides full protection to systems and loads which may encounter large current conditions. These devices contain a 0.11Ω current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Internally, current is prevented from flowing when the MOSFET is off and the output voltage is higher than the input voltage. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2140/42/44/46, if the constant current condition still persists after 30ms, the part will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2140/44 have an auto-restart feature which will turn the switch on again after 450ms if the ON pin is still active. The FPF2142/46 do not have this auto-restart feature so the switch will remain off until the ON pin is cycled. For the FPF2143/47, a current limit condition will immediately pull the fault signal pin low and the part will remain in the constant-current mode until the switch current falls below the current limit. The minimum current limit is 200mA for the FPF2140/42/43 while that for the FPF2144/46/47 is 400mA. These parts are available in a space-saving 6 pin 2X2 MLP package.

Product Status/Pricing/Packing

Product Product Status Eco Status *Pricing Package Type Leads Packing Method Package Drawing **Package Marking Convention RoHS IPC1752 RoHS/REACH/JIG Certificate of Compliance
FPF2146 Full Production Green as of Aug 2006 $0.479 MicroFET 6 TAPE REEL PDF Line 1:&E (Space)
&Y (Binary Calendar Year Coding)
Show more ...
PDF opens in a new window
XML opens in a new window
PDF opens in a new window

Features

  • 1.8 to 5.5V Input Voltage Range
  • Controlled Turn-On
  • 200mA and 400mA Current Limit Options
  • Undervoltage Lockout
  • Thermal Shutdown
  • 2µA Shutdown Current
  • Auto Restart
  • Fast Current limit Response Time
  • 5µs to Moderate Over Currents
  • 30ns to Hard Shorts
  • Fault Blanking
  • Reverse Current Blocking
  • Power Good Function
  • RoHS Compliant

Applications

  • Media Tablets
  • Mobile Handsets
  • PMP/MP3 Players
  • Storage & Peripherals
  • Wireless LAN Card & Broadband Access

Application Notes

Multilanguage - Chinese Multilanguage - English Multilanguage - Japanese Multilanguage - Korean